Fume cupboards
for general use.

Fume cupboards for general laboratory use are designed to be used in work that involves the release of a wide variety of non-concentrated chemicals but not that of large amounts of heat. Your specification of the intended use will allow us to identify the type of fume cupboard you require.

Close-up of a Burdinola Elite fume cupboard

Elite

Elite fume cupboards are recommended for the evacuation of fumes, fine dust and light particles from the work area to prevent contamination of the laboratory atmosphere.

What sets Elite fume cupboards apart from other low-flow fume cupboards is the addition of our patented Microclimate system, which acts in and around the fume cupboard to minimise the influence of external disturbances and increase safety and efficiency.

As a differential value, and after having carried our numerous field tests under adverse conditions, we can categorically state that it is the most energy-efficient model on the market.

Characteristics:

  • Range certified under parts 2, 3 and 6 of European standard EN-14175.
  • Aerodynamic design that makes it possible to obtain unique results in terms of containment and energy efficiency.
  • Large and practical inner cabinet capacity with an interior height of 1,415 mm and a glazed upper part that allows full visibility of the tests being carried out inside.
Close-up of a Burdinola eFlex ST fume cupboard

eFlex ST

eFlex ST cupboards are recommended for the evacuation of fumes, fine dust and light particles from the work area to prevent contamination of the laboratory atmosphere.

They are not recommended for use with compounds emitting ionising radiation, concentrated acids with a high thermal load, or pathogens.

The eFlex ST Low version for low ceilings can be installed in laboratories with a minimum height of 2,700 mm.

Specifications:

  • Range certified under parts 2.3 and 6 of the EN-14175 European standard.
  • Aerodynamic design that makes it possible to obtain optimum results in terms of containment and energy efficiency.
  • Large and practical inner cabinet capacity with an interior height of 1,415 mm and a glazed upper part that allows full visibility of the tests being carried out inside.
Close-up of a Burdinola Green Cycle fume cupboard

Green Cycle

Fume cupboard with built-in filtration system, no extraction ducts required.

Specially designed for laboratories where flexibility is of the essence, the Green Cycle version with wheels is quite unique in the market.

Developed in collaboration with ERLAB, a European leader in air filtration for the protection of laboratory personnel.

Our new Green Cycle features new, simpler and safer technology to provide enhanced, real-time safety.

It monitors the performance of the Neutrodine Unisorb filter in accordance with the most stringent safety standards governing filtration and containment.

Applicable to the vast majority of laboratory manipulations including liquid and powder manipulation.

Characteristics:

  • Designed and tested in accordance with parts 2, 3 and 6 of the EN-141756 standard.
  • Filtration tests in accordance with NFX 15-211.
  • Large and practical inner cabinet capacity with an interior height of 1,415 mm and a glazed upper part that allows full visibility of the tests being carried out inside.
Close-up of a Burdinola eFlex M fume cupboard

eFlex M

eFlex M fume cupboards are specifically designed to provide full access to large apparatus.

They are not recommended for use with compounds emitting ionising radiation, concentrated acids with a high thermal load, or pathogens.

Specifications:

  • Range certified under parts 2, 3 and 6 of European standard EN-14175.
  • Their aerodynamic design ensures optimum results in terms of containment and energy efficiency.
  • Large and practical inner cabinet capacity with an interior height of 1,815 mm. Available for installation with individual or shared ventilation, with optimised VAV systems.
Close-up of a Burdinola eFlex W fume cupboard

eFlex W

eFlex W are specifically designed to provide full access to large apparatus or tests that need to be carried out on a mobile bench or on the floor. They are not recommended for use with compounds emitting ionising radiation, concentrated acids with a high thermal load, or pathogens.

Characteristics:

  • Range certified under parts 2.3 and 6 of the EN-14175 European standard.
  • Their aerodynamic design ensures optimum results in terms of containment and energy efficiency.
  • Large and practical inner cabinet capacity with an interior height of 2,315 mm. Available for installation with individual or shared ventilation, with optimised VAV systems.

Fume cupboards
for specific uses.

These fume cupboards are designed for work with high thermal loads or strong acids (perchloric and hydrofluoric acid), fume cupboards with extractor hoods for solvents and fume cupboards for radioisotopes. Burdinola fume cupboards for concentrated acids and high thermal loads have specific construction, maintenance and safety characteristics as set out in part 7 of EN-14175.

Close-up of a Burdinola eFlex AC fume cupboard

eFlex AC

eFlex AC fume cupboards are designed for the manipulation of concentrated acids and high thermal loads.

They are recommended for the evacuation of aerosol fumes generated in reactions with concentrated acids handled in the work area, in order to prevent contamination of the laboratory atmosphere.

They are not recommended for use with hydrochloric acid, compounds emitting ionising radiation, large amounts of solvents, or pathogens.

Specifications:

  • Range certified under parts 2 and 7 of the EN-14175 European standard.
  • The design of the eFlex AC fume cupboard ensures safety and operating objectives at high temperatures and prevents dangerous concentrations and deposits of acids or hydroxides in the work area.
Close-up of a Burdinola eFlex ACF fume cupboards

eFlex ACF

eFlex ACF fume cupboards are designed for the manipulation of hydrofluoric acid.

They are recommended for the evacuation of aerosol fumes generated in reactions with hydrofluoric acid handled in the work area, in order to prevent contamination of the laboratory atmosphere.

They are not recommended for use with compounds emitting ionising radiation, concentrated acids with a high thermal load, or pathogens.

Characteristics:

  • Range certified under parts 2 and 7 of the EN-14175 European standard.
  • The design of the eFlex ACF fume cupboards ensures safety and operating objectives when handling hydrofluoric acid and prevents dangerous concentrations and deposits in the work area.
Close-up of a Burdinola eFlex Perchloric Acid fume cupboard

eFlex Perchloric Acid

The eFlex Perchloric Acid fume cupboard is designed and tested in accordance with the EN-14175 standard.

Recommended for the evacuation of perchloric acid fumes.

They are not recommended for use with compounds emitting ionising radiation, concentrated acids with a high thermal load, or pathogens.

Specifications:

  • Range manufactured under parts 2 and 7 of European standard EN-14175.
  • The design of the fume extractor hood ensures safety and operating objectives when handling perchloric acid and prevents dangerous levels of concentrations and deposits in the work area.
  • The cabinet interior is made from a single stainless steel sheet and has a sash made from 3 + 3 mm bi-laminate glass. It is fitted with a shower and a longitudinal sink to prevent the formation of explosive crystals in the work area.
Close-up of a Burdinola eFlex D fume cupboard

eFlex D

The eFlex D cupboard is designed and tested in accordance with the EN-14175 standard.

Recommended for the evacuation of flammable solvent fumes from the work area to prevent contamination of the laboratory atmosphere.

They are not recommended for use with compounds emitting ionising radiation, concentrated mineral acids or pathogens.

Characteristics:

  • Range certified under parts 2 and 7 of the EN-14175 European standard.
  • The design of the fume cupboard for solvents ensures safety and operating objectives when handling solvents and prevents dangerous concentrations and deposits in the work area.
  • The cabinet interior is made from a single stainless steel sheet and has a sash made from 3 + 3 mm bi-laminate glass.
Close-up of a Burdinola eFlex RB fume cupboard

eFlex RB

Our fume cupboards for the manipulation of radionuclides emitting beta type ionising particles meet the requirements for handling high-energy radionuclides.

eFlex RB fume cupboards are recommended for low radiotoxicity.

The cabinet interior is made from fibreglass and polyester, with rounded corners to facilitate possible decontamination.

The front shield (mobile window) in 10 mm polycarbonate overlaps the work area to ensure safety.

They feature peepholes that allow user access without the need to open the cabinet vertically. They are not recommended for concentrated mineral acids, solvents or pathogens.

They have a set of three filters that combines an impregnated carbon filter with absolute filters and provides an efficiency of 99.99%. A fixed flow system and a frequency converter come as standard.

Our fume cupboards for the manipulation of radium isotopes are outside the scope of the normal fume cupboard standard.

Close-up of a Burdinola eFlex RG fume cupboard

eFlex RG

Fume cupboards for use with radionuclides generating gamma type ionising emissions, for medium and high radiotoxicity.

The cabinet interior is made of fibreglass and finished in polyester, with rounded corners to facilitate possible decontamination. The radiation shield is reinforced against ionising radiation by the addition of a 2.5 mm thick layer of lead.

The front shield (mobile window) in 10 mm polycarbonate overlaps the work area to ensure safety.

They feature peepholes that allow user access without the need to open the cabinet vertically.

They are not recommended for concentrated mineral acids, solvents or pathogens.

They have a set of three filters that combines an impregnated carbon filter with absolute filters and provides an efficiency of 99.99%. A fixed flow system and a frequency converter come as standard.

Our fume cupboards for the manipulation of radium isotopes are outside the scope of the normal fume cupboard standard.

Characteristics
Fume cupboards:

Safe and efficient

Our fume cupboards are world leaders in terms of user safety and energy efficiency. The accolades we receive from our customers worldwide endorses the quality and innovation of our products.

The highest standard on the market in terms of safety and efficiency. The main indicators that a fume cupboard is functioning correctly are:

  • CONTAINMENT: "Capacity to contain pollutants in the workspace".
  • ROBUSTNESS: "Performance of the fume cupboard in the event of a reproducible adverse event".
  • EFFICIENCY: "Capacity to remove pollutants".

Wide range

We have more than 40 models, which ensures that we can cover all of the most common laboratory applications.

The highest standard on the market in terms of safety and efficiency. The main indicators that a fume cupboard is functioning correctly are:

  • Available in two heights to suit the construction characteristics of the laboratory.
  • Electrical and fluid service modules can be fitted externally on the side, on the front panel, or on the inside.
  • Modules of 1200, 1500, 1800, 2100 and 2400.